Maximizing truck bed space is key when you’re carrying cargo. But you also need to protect that cargo from the elements – dust, rain, snow, road debris, and anything else your wheels kick up. On-road and off-road drivers alike trust BAK Industries’ folding truck bed covers for solid protection. Since 1988, the California-based company has produced superior-quality covers that set industry standards for durability, reliability, and quality. And whether you choose the BAKFlip G2, the BAKFlip MX4, or another cover from BAK Industries, you get solid performance, protection, and aesthetics.

The BAKFlip G2: Sleek, Sturdy, and Affordable

Whatever hard folding cover you select must meet your needs. But it’s also got to look good on your truck. BAK Industry’s BAKFlip G2 excels at both these qualities and provides more than that. The BAKFlip G2 sports durable solid panels with attractive aircraft-grade aluminum skins, offering 100% truck bed access while supporting up to 300 pounds of evenly distributed weight over it. The G2 Hard Fold Cover has powder-coated panels that protect the varnish against harsh summer rays with UV. And the EPDM seals ensure maximum water-resistant abilities of the BAKFlip G2 Cover.

How to Install the BAKFlip G2  Folding Tonneau Cover?

The most worrying part about most truck bed covers is their installation. The installation of BAKFlip G2 Hard Folding Tonneau Cover is relatively easy. This is because when you get everything out of the box, it is completely equipped with whatever you’ll need. The tonneau cover comes with the side rails, the drain tubes, the clamps, bulkhead seal, bumpers, and the star knobs. There are also prop rods for both sides to hold up the cover. Now for the drop-in bed-liners, you don’t need a bulkhead seal.

But if the truck has bed-rail caps, you need to put on this bulkhead seal like most of the newer ones do. Following this step, install the clamps on the side rails, then fix the Tonneau Cover by the knobs. The installation is easy because you don’t have to drill the panels. The lightweight cover, around 40lbs, gives the edge of handling and installing even by a single person. You just need to spare 10-15 minutes to properly install the cover over the truck bed, even with little or no experience at all.

Pros of BAKFlip G2 Folding Tonneau Cover

There are a lot more benefits to BAK Industry’s BAKFlip G2 Cover. You can say that the pros of the G2 hard folding bed cover outweigh the cons.

1.The G2’s weather- and UV-resistant cover doesn’t fade or chalk.

2.It helps to keep its durability and sleek look for years to come.

3.And with a no-drill installation and automatic latching panels, storing and shielding your cargo is easier than ever.

4.Add a two-year warranty and BAKBox 2 toolbox compatibility, and you have a robust and versatile cover at an affordable price.

Cons of BAKFlip G2 Folding Tonneau Cover

If you are a very calculative person and want to know the not-so-good things about it before buying, here are a few of them.

1.Cleaning the surface of the BAKFlip G2 Cover is the only problem.

2.The texture of this Tonneau Cover makes it a bit difficult to keep clean.

The BAKFlip MX4: A Durable and Attractive Upgrade

When you need more robust protection, the BAK BAKFlip MX4 hard folding truck bed cover delivers it efficiently. The MX4 sports aircraft-grade aluminum surfaced panels with heavy-duty cores and marine-grade vinyl over an aluminum frame, supporting up to 400 pounds of evenly distributed weight over it. Its black matte finish delivers premium UV resistance – with matte-finished clamps and elevator bolts to match the design. And thanks to advanced scratch, scuff, and fade resistance, your MX4 cover retains its gorgeous look for longer.

How to Install the MX4 Truck Bed Cover?

The installation process for the MX4 truck bed cover is almost the same as that of the BAKFlip G2 Tonneau Cover. Like before, this advanced model does not require drilling of the panel. It saves you from the complex process, unlike most rolling setups. The placement is easy by adjusting the cover over the side rails’ position, putting clamps under it. The clamps, along with the bulkhead seal, prevent the cover from moving around while driving. You can get the installation done in less than 10-15 minutes single-handedly with less tool and less hassle. But if you have assistance, the process will be much easier.

Pros of BAKFlip MX4 Hard Folding Truck Bed Cover

The MX4 comes with other key improvements from the G2. There are some advancements, which are upgraded versions of G2.

  • Finished cab corner caps incorporate softer seals, giving the MX4 a more finished look.
  • Upgraded latch housing components and a dual-action seal allow you to close your cover tailgate without opening the cover.
  • The cover is secure, sturdy, and looks great.
  • It also doesn’t vibrate and make a rattling noise while you are driving.
  • This new feature gives you one-handed closing, incredibly convenient when you’re pressed for time.
  • With all these upgrades, you still get 100% truck bed access plus an extended three-year warranty. How cool is that?

Cons of BAKFlip MX4 Hard Folding Truck Bed Cover

There are only one or two performance issues. Those are the way customers’ needs as some want even safer truck bed cover than this design.

  • Due to the vertical locking design of the truck bed cover, one must always seal the cover properly, and leaving it open isn’t viable.
  • For loads that are too tall for the cover, one has to remove the whole truck bed altogether.

Shopping for Your Tonneau Cover

Now that you’ve seen what the BAKFlip G2 and the MX4 can do, it’s time to go shopping. While you’re browsing, you may come across other great options like the Revolver RX4, the Revolver X2, the BAKFlip CS-F1, and the Vortrak. BAK Industries has a vast range of hard folding truck covers, so you’re bound to find a model that meets your needs.

So how do you shop for “tonneau covers near me?” Your best bet is visiting a reputable off-roading parts and accessories dealer. Look for a retailer with competitive pricing, world-class customer service, affordable shipping, and industry expertise. Many cover models are custom-fitted to specific vehicles. Your dealer should have made model, year, and sub-model menu selections to help you choose a cover that fits your truck. So, go on and buy one for your truck bed fast!

Avatar
Author

The LifeStyle Design Team Includes Many Experts From different walks of life. Every Writer is vetted Carefully. We Strive To put only the best content for our users. As Always, Feel Free To Make Any Comments Or Suggestions.